Plastics
MIL diversified into the field of Plastic Lining in 1989, as an extension of their technical expertise and capabilities in corrosion resistant field and has been a key player since then. MIL manufactures in a state-of-the-art factory at Gummidipoondi, near Chennai Metropolis, set up in technical collaboration with M/s. Fluorocarbon Company Ltd, UK, an extensive range of Plastic lined Pipes, Fittings, PTFE Expansion Joints / Bellows, PTFE lined Dip Pipes / Spargers, PTFE Spectacle Blinds, SS Braided Plain Corrugated Hoses, PTFE Tubes, Thermowells, Slide Bearings, Machined / Moulded products and so on. The annual installed capacity is 50 Metric Tonnes of Fluoropolymer Resins.
This factory is a true replica of our Collaborator's Facility in Manchester, U.K with respect to size, plant layout, production and utilities. The Factory has built up area of 1050 sq.m and have standby DG set to meet our power requirements.
MILFLORON Product Range
- PLASTIC (PTFE/PFA/FEP/PP) LINED PIPES & FITTINGS
Complete range of sizes from 15 to 500 NB and lengths upto 6 mtr depending on size and suitable for pressure and vacuum applications
- PTFE PLAIN / CONVOLUTED HOSES, PTFE TUBES
For size range 6.3 NB to 100 NB and length upto 5 mtr depending on size, SS braided / rubber covered
- PTFE SPECIAL PARTS FOR MEMBRANE CELLS
Cathode / Anode Insert pipes, catholyte headers / anolyte outlet pipes
- PTFE LINED DIP PIPES / SPARGERS / THERMOWELLS
From 25 to 150 NB and dip length upto 5 mtr depending on size & construction offered (welded / continuous)
- PTFE LINED DIP PIPES /SPARGERS/ THERMOWELLS
From 25 to 250 NB and dip length upto 5 mtr depending on size & construction offered (welded / continuous)
- VIRGIN / ANTI-STATIC PTFE LINER TUBES
For lining of CS/SS pipes, fittings & braidings
- PTFE EXPANSION JOINTS / LINED SS BELLOWS
From 20 to 700 NB with 2 to 10 convolutions and complete with integral flanges, reinforcement rings, tie rods & sleeve insert if required
- PTFE SLIDE BEARING PLATES
For bridges/flyovers, heat exchangers, furnaces, storage tanks, piping supports, etc
- FLUOROPOLYMER / FUSIBOND EPOXY COATINGS
Offering solutions to chemical corrosion, abrasion, high friction and release problems
- PTFE COMPONENTS (VIRGIN / FILLED GRADES)
Moulded, punched and machined components such as machined bellows, bearings, bushes, collars, gaskets, `O' rings, seals, chevron packings, etc.
- FLUOROPOLYMER LINING
For columns, vessels, tanks, etc.
Manufacturing Infrastructure
MIL's state-of-the-art factory at Gummidipoondi near Chennai, with an annual installed capacity of 50 Metric Tonnes of Fluoropolymer Resins, has a built up area of 1050 sq.m. and a standby DG set to meet our power requirements. The manufacturing facilities include the following Plant & Machinery
MACHINERY DESCRIPTION
- Custom designed & Built Process Controllable Paste Extruder
- Imported Flaring Machines - 2 nos.
- Imported 9 M long Micro-Processor controlled Sintering Oven for paste extruded Tubes
- Sintering Oven for moulded components
- Die Heating Oven
- Baking Oven for coated components
- Assorted Moulds, Dies and Toolings, both imported and indigenous
- Motorised Winches - 2 nos.
- Hydraulic Presses 500 MT, 50 MT, 30 MT, 25 MT - 1 no. each & Hand Press - 2 Nos.
- Resin Mixer
- Electronic Weighing Balance
- Hot Air Dryer
- Lathe
- Drilling Machine
- Air Compressor
- Air Conditioned Room for storing PTFE Resin
- Tensile Testing Machine
- Specific Gravity Testing Machine
- High Voltage Spark Tester 0 - 25 KV for checking the continuity of PTFE Lining
- Hydraulic Test Equipment
- Tube Furnace for incineration with inert gas atmosphere facility
Major Achievement
- VCM /PVC INDUSTRY
For this core sector industry, we possess a rare distinction of having supplied PTFE lined Pipes & Fittings at project stage to all the three major producers of VCM / PVC in the country namely, Reliance Industries Ltd, Finolex Industries Ltd and Indian Petrochemicals Corporation Ltd. One of the biggest orders bagged by MIL in recent times, for the supply of PTFE lined Pipes & Fittings involving more than 5000 pieces, was from IPCL, for Gandhar Petrochemical Complex at Dahej
- PULP & PAPER INDUSTRY
MIL is proud to have executed turnkey supply of PTFE lined Pipes and PTFE / FEP lined Fittings for Pulp Mill Expansion at Sarapaka (A.P), ITC Ltd - Bhadrachalam Paperboards involving more than 600 pieces and the size range was 25 NB through 250 NB
- PESTICIDES INDUSTRY
MIL has executed many project orders for Bayer Cropscience Ltd., Gharda Chemicals Ltd., Nagarjuna Agrichem Ltd. and Bhagiradha Chemical & Industries Ltd. The total number of pieces supplied so far would exceed 7,000 nos.
- VCM /PVC INDUSTRY
For this core sector industry, we possess a rare distinction of having supplied PTFE lined Pipes & Fittings at project stage to all the three major producers of VCM / PVC in the country namely, Reliance Industries Ltd, Finolex Industries Ltd and Indian Petrochemicals Corporation Ltd. One of the biggest orders bagged by MIL in recent times, for the supply of PTFE lined Pipes & Fittings involving more than 5000 pieces, was from IPCL, for Gandhar Petrochemical Complex at Dahej
- EXPORT BUSINESS
MIL has been exporting its PTFE / PFA lined products to various countries like Qatar, Saudi Arabia, Jordan, Oman, Kuwait and recently to Singapore
- CHEMICAL INDUSTRY
We also had the privilege of having supplied PTFE / PP Lined Pipes, PTFE / FEP / PP lined Fittings, PTFE Expansion Joints, PTFE Convoluted Hoses to M/s. Gujarat Fluorochemicals, Sterlite Industries Ltd, Transmetal Ltd, Tanfac Industries Ltd, Birla Cellulosic, Atul Ltd, Transpek Industry, etc.
We are currently executing an order for M/s. Deccan Fine Chemicals (India) P. Ltd, Hyderabad for supply of PTFE Lined Pipes & PTFE / FEP lined Fittings valued around INR 20 millions which will give you a fairly good insight of MIL's capabilities, rich experience and technical expertise in handling jobs of such a magnitude within the scheduled time, which is an essence of any project order.