 |
Abrasion resistant Rubber Compound for Iron Ore Slurry. |
|
|
Rubber Flexible Cell Covers reinforced in two layers as import
substitute. |
|
|
High temperature Resistant Natural Rubber Compound (90 Deg. C Phosphoric Acid). |
|
|
Rubber Expansion Joints to withstand up to 20
Kg/cm2 |
|
|
Three Layer Lining (Soft-Hard-Soft Rubber Compound) for Phosphoric Acid Plants. |
|
|
Hypalon Extrusion Compound . |
|
|
Pressure Vulcanization of vessels at Site for vacuum service |
|
|
Calcium, Magnesium free compound for membrane Cell Plants for Site Vulcanization. |
|
|
Exhaust/Low Pressure Curing Neoprene Compound |
|
|
Rubber Expansion Joints to withstand upto 20 Kg/cm2 pressure in process lines |
|
|
EPDM Gaskets for Membrane Cell based Caustic Chlorine Plants |
|
|
Polyurethane Adhesive – both one component and two component |
|
|
Food grade Rubber lining |
|
|
NR/SBR Lining for handling PVC Latex, with improved impact strength |
|
|
Exhaust Steam Curing Natural Rubber Compound |
|
|
Viton Gasket for DMSRDE |
|
|
Pressure Vulcanization of Pipes and Fittings at site |
|
|
Silicone Rubber seal-ring for anti-surge Valve for Gas Turbine . |
|
|
Chlorobutyl Rubber lining for Gujarat Alkalies & Chemicals Limited |
|
|
Hard Rubberlining of Butterfly Valve for Fouress Engineering for Sea Water application |
|
|
Development of food grade Rubber compound |
|
|
Chlorobutyl compound for Salt Producing Plant |
|
|
Natural Rubberlining Compound for 85% Phosphoric Acid |
|
|
Special Anti-corrosive Tank Lining for Desalination Plant |
|
|
Rubber lining of Phosphoric Acid Storage Tanks and Process Equipments with High Bond strength Cold Bond Adhesive |
|
|
Development of Fabric Expansion Joint to withstand high temperature such 250 to 400 Deg. C encountered in Power Plants, Petro Chemical Industries Oil, Gas and Off Shore Installation, Cement Plants, Fertilizer Plants etc. (Flue Gas Lines, Hot Gas Ducting etc.) |
|
|
New Ambient Temperature Curing Adhesive formulation for bonding pre-vulcanized Rubber to metal having very high bond strength equivalent to pressure vulcanized samples in Autoclave at high pressure & temperature. |
|
|
New TRIPLE LAYER compound for Phosphoric Acid / Fertilizer Industries capable of vulcanizing by internal Steam Curing method at Low Pressure and Temperature (1.4 Kg/cm2 at 1200 C ) |
|
|
Exhaust Steam Curing (Atmospheric Pressure at 90 to 950C) TRIPLE LAYER compound for vulcanizing large size process Tanks for Phosphoric Acid / Fertilizer Industries |
|
|
Development of High Pressure Hoses/ Vacuum Hoses / Dredging Hoses for various Acid / Oil / Slurry / Dredging Service for sizes up to 400 NB and length up to 10
metres. |
